Set up and connectNL
Electrical connection
Connecting the appliance electrically
Comments
†Observe the "Safety
sing" →
Page 4
†
†Only connect the device
on an AC voltage of 220 - 240 V
and 50 Hz or 60 Hz.
†Please note that the wa-
The protection system only works
when the device is supplied with
power.
1.Connect the appliance plug of the
connecting cable to the appliance.
2.Plug the appliance into a mains
socket in the vicinity of the
appliance.
The connection data of the device
can be found on the type plate.
3.Check the plug for tightness.
15
To Next Page
Loading...
