Basic settings NL
BB
asis settings
asis settings
BYOU
asis settings
You can configure the basic settings of your device according to your needs.
Overview of the basic settings
The basic settings depend on the equipment of your appliance.
Basic setting
Time setting
Choice
00:00 - 24:00
Description
Set the current time.
The setting depends on the set time
format.
Time format
Time display
12 h
24 hours1
Set the time format.
In hours
Time1
Set the program end time setting.
"Ready in" shows the remaining time of the
program, eg 3h 25min.
"Ready at" shows the time of the program
end, eg 15:20.
Speech/Language
water hardness
See the selection on the
device.
Set the menu language.
0 - 50
13 - 16 average1
Set the water hardness.
"Overview of the water hardness
settings", page 28
Rinse aid settings 0 - 6
51
Set or switch off the amount of rinse
aid.
"Setting the rinse aid amount", Page
31
Sensor setting Standard1
Sensitive
Very sensitive
Set the water sensor for the dirt detection.
"Sensors", Page 13
Extra drying On
Out1
Enable or disable "Extra Drying" for each
mode.
For improved drying results, the temperature is
increased during the final rinse. The running time
may increase slightly.
Pay attention to delicate items of crockery.
1
Factory setting (may differ depending on the device type)
39
To Next Page
Loading...
