NLCleaning and maintenance
2.Turn the coarse sieve
counterclockwise
to take
5.Clean the sieve elements under
running water.and the sieve system out
†
Carefully clean the dirt edge between
the coarse and fine sieve.† Make sure that no foreign objects
fall into the pump reservoir.
6.Assemble the screening system.
Check that the coarse sieve locking
cams are engaged.
2
7.Place the sieve system in the
appliance and turn the coarse
sieve clockwise.
† Check that the arrow marks are
opposite each other.
1
3.Pull the microsieve downwards.
4.Press the locking pieces together
and remove the coarse sieve
upwards .
2
1
46
To Next Page
Loading...
