Bosch SMI8ZCS02E - Page 52

NLTroubleshooting
Malfunction Cause Troubleshooting
Insides of the appliance
are wet after the wash
cycle.
No malfunction. For
condensation drying, water
droplets in the rinse aid
container in the reservoir are
necessary and desirable. The
moisture in the air condenses
on the inner walls of the
device, flows downwards and
is pumped out.
No action required. No action
required.
Food residue on the
crockery.
Crockery is placed too close
together or the basket is
too full.
1.Arrange the crockery with sufficient
space in between.
The spray jets must be able to
reach the surface of the
dishes.
2.Avoid touch points.
Spray arms cannot
rotate freely.
▶ Arrange the dishes in such a way
that the dishes do not hinder the
rotation of the spray arm.
Spray arm nozzles are
clogged.
▶ Clean the "spray arms"
→Page 47.
The seven are polluted. ▶ Clean the sieves.
"Cleaning sieves", Page 45
The strainers are incorrectly
fitted and/or not secured.
1. Apply the sieves properly.
"Sieving System", page 45
2.Secure the seven.
Washing program too weak
chosen.
▶ Select a more powerful rinse
programme.
"Programs", Page 20
▶ Adjust the sensitivity of the
sensor system.
"Sensors", Page 13
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
▶ Only remove coarse food residues
and do not pre-rinse the dishes.
▶ Adjust the sensitivity of the
sensor system.
"Sensors", Page 13
Tall, narrow pieces of
crockery are insufficiently
spread out in the corners.
flushed.
▶ Do not arrange tall, narrow pieces
of crockery too obliquely or in the
corners.
52