Bosch SMS4HCW19E - Cutlery Drawer; Before First Use; Initial; Commissioning

usede
8.5 Cutlery drawer
Requirement:The device is set up and
connected. → Page 11
Put cutlery in the cutlery drawer.
1.Pour in special salt. → Page 26
2.Fill in rinse aid. → Page 28
3.Turn on a device. → Page 34
4.Set the softening system.
→ Page 26
5.Adjust the amount of rinse aid added.
→ Page 28
6.Fill in the cleaner
→ Page 29 .
7.Start the program with the highest
cleaning temperature without
dishes.
We recommend operating the
device without dishes before first
use due to possible water stains and
other residues.
Place cutlery with the pointed and
sharp side facing down.
G9 Before the first
use
use
Tip:These settings and other basic
settings → Page 37 you can change it
again at any time.
use
9.1 Carry out initial
commissioning
10 softening system
When using the device for the first
time or after restoring the factory
settings, you must make settings.
Hard, calcareous water leaves
limescale residue on the dishes and
the washing container and can clog
parts of the appliance.
To get good washing results, you can
soften water using the softening
system and special salt. To avoid
damage to the device, water with a
hardness above 7 °dH must be
softened.
Tip:Connect your device to a mobile
device. You can easily adjust all
settings using the Home Connect
app.
10.1 Overview of the water hardness settings
Here you will find an overview of the adjustable water hardness values.
You can ask the local waterworks or determine with ter.The water hardness level
a water hardener
25