format: hhmm. Both must be entered together in a single sequence, i.e.:
DDMMYYhhmm.
For example, to enter a date and time of 26th July 2015, 4:30 pm:
1. Enter the date and time master code operation: [ 2 5 8 0 6 # ]
2. Enter the date and time: [ 2 6 0 7 1 5 1 6 3 0 # ]
You will need to reprogram the date and time whenever power is lost to the system.
Need more information?
Hopefully this guide has helped you program your Solution 2000/3000 alarm system and
you now have an understanding of the programming principles. Please refer to the User’s
Guide for a better understanding of basic user operations, such as arming, disarming and
testing the system. The Quick Reference Guide and Installation Guide offer more detail
on installation and advanced programming — use them to find a more complete list of
locations and operations.
Page !12 of !12
To Previous Page
Loading...
