Bosch Solution-16 safecom - User Manual

Solution-16/
Solution-16 Safecom
Quick Reference Guide
ISSUE 2.41

Bosch Solution-16 safecom Specifications

General

Zones	16
Partitions	2
User Codes	50
Event Log	256 events
Battery Backup	12V 7Ah
Weight	2.5 kg
Communication	PSTN

Summary

Programming Overview

Programming Using A Codepad

Explains how to program the control panel using a codepad, including entering installer mode.

Installers Programming Commands

System Arming Modes

System Disarming Modes

AWAY and STAY Modes

Explains disarming in AWAY and STAY modes.

Zone Isolation

Standard & Code Isolation

Steps for standard and code-based zone isolation.

User Code Management

Add;Delete User Code

Provides instructions on adding and deleting user codes.

System Configuration

Setting Date and Time

Details the steps required to set the system's date and time.

Fault Analysis

Telephone Number Configuration

Primary & Secondary Numbers

Specifies locations for programming primary and secondary telephone numbers.

User Code Setup

Installer Code & User Codes

Details programming installer code and user codes.

Zone Configuration

Zone 1-11 Settings

Details programming locations for Zones 1 through 11.

Event Code Configurations

Output Configuration

Output 1-14 Settings

Output Polarity & Timing

Entry & Exit Times

Times for AWAY & STAY Modes

System Date & Auto-Arming

System Options

System Options 1-4 (V1.10;V1.20+)

Consumer Options

Consumer Options 1 & 2

System Time & Options

Wiring Diagram

Codepad Connections (Partitioning)

Area Codepad Configuration