Bosch Solution-16 safecom User Manual

Codepad Indicators
Data
Value
Zone 1
Indicator
Zone 2
Indicator
Zone 3
Indicator
Zone 4
Indicator
Zone 5
Indicator
Zone 6
Indicator
Zone 7
Indicator
Zone 8
Indicator
MAINS
Indicator
0
1
X
2 X
3
X
4 X
5
X
6 X
7
X
8
X
9
X X
10
X
11 X X
12
X X
13 X X
14
X X
15 X X
Programming Option Bits
You will notice option bits throughout the quick reference guide. This allows you to program any
combination of the four different options in the one location by adding the options together.
Programming a zero (0) will disable all four options.
Example
If at LOCATION 663 you only want options 1, 2 and 4, add the numbers together and the total is
the number to be programmed. In this example, the number to be programmed is 7 (Eg. 1 + 2 + 4
= 7).
Option Description
1 Dialler Reporting Functions Allowed
2
Remote Arming Via Telephone Allowed
4 Upload/Download Via Alarm Link Allowed
8
Terminate Alarm Link Session On Alarm
Installer’s Programming Commands
These commands can only be used when you enter Installer’s Programming Mode. Enter the
command followed by the # key.
Command Description
958
Enable/Disable Zone Status (Hand Held Programmer Required)
959 Test Programming Key
960
Exit Installer’s Programming Mode
961
Default System Back To Factory Settings
962
Copy Panel Memory To Programming Key
963
Copy Programming Key To Panel Memory
964 Erase Programming Key
965
Default System For Domestic Dialling Format
966 Enable/Disable Automatic Stepping Of Locations When Programming
999
Display Software Version (Hand Held Programmer Required)
4 Solution-16/Solution-16
Safecom
Quick Reference Guide
SOL 16 SAFECOM QUICK REF GUIDE.DOC.DOC Bosch Security Systems Pty Limited

Bosch Solution-16 safecom Specifications

General

Zones	16
Partitions	2
User Codes	50
Event Log	256 events
Battery Backup	12V 7Ah
Weight	2.5 kg
Communication	PSTN