Bosch Solution-16 safecom User Manual

Arming The System (On)
AWAY Mode
1.
Press and hold the # key until two beeps are
heard.
Or
2. Enter your code followed by the # key.
[eg. 2580 + #].
STAY Mode 1
1. Press and hold the * key until two beeps are
heard.
Or
2.
Enter your code followed by the * key.
[eg. 2580 + *].
STAY Mode 2
1. Press and hold the 0 key until two beeps are
heard.
Arm All Areas In AWAY Mode (Partitioning)
1. Enter your code followed by 0 and then the #
key [eg. 2580 + 0 + #].
This function allows a code to arm all areas that the
code is assigned to in AWAY Mode at the same time
without the need to arm each area individually.
Disarming The System (Off)
AWAY Mode
1. Enter your code followed by the # key.
[eg. 2580 + #].
STAY Mode 1
1.
Press and hold the * key until two beeps are
heard (Only if no alarm).
Or
2. Enter your code followed by the # key.
[eg. 2580 + #].
STAY Mode 2
1.
Press and hold the 0 key until two beeps are
heard (Only if no alarm).
Or
2.
Enter your code followed by the # key.
[eg. 2580 + #].
Disarm All Areas (Partitioning)
1. Enter your code followed by 0 and then the #
key [eg. 2580 + 0 + #].
This function allows a code to disarm all areas that
the code is assigned to at the same time without the
need to disarm each area individually.
Isolating Zones
Standard Isolating
1.
Press the * key twice.
2. Enter the zone number that you want to
isolate followed by the * key.
Repeat step 2 if more than one zone is
required to be isolated.
3. Press the # key to exit when finished.
Code To Isolate
1.
Press the * key once.
2.
Enter your user code.
3. Enter the zone number that you want to
isolate followed by the * key.
4. Repeat step 2 if more than one zone is
required to be isolated.
5. Press the # key to exit when finished.
Solution-16/Solution-16
Safecom
Quick Reference Guide
5
Bosch Security Systems Pty Limited

Bosch Solution-16 safecom Specifications

General

Zones	16
Partitions	2
User Codes	50
Event Log	256 events
Battery Backup	12V 7Ah
Weight	2.5 kg
Communication	PSTN