Bosch Solution 64 - Day; Name; Start; Stop Day; Keypad Hi;Lo Temp

27
Bosch Security Systems 09/06 BLCC110U
Solution 64 User Guide
3. Enter the new start and stop times in 24-hour format
(00:00 to 23:59 hours).
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Schedules >
Day
MENU 7-5-2
This menu programs which days of the week the timer execute
function will operate. To toggle the day of the week on/off, press
the corresponding number on the keypad (e.g. to turn Monday
on, press [2] + [OK], to toggle Monday off, press [2] + [OK] ).
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [5] + [2].
A list of schedules will display on the keypad.
Sk001 Schedule 1 Name
Sk002 Schedule 2 Name
Sk003 Schedule 3 Name
Press  OK or MENU
2. Use the [
↑] and [↓] keys to select the schedule that you
want to change, then press [OK] to select. Alternatively,
you can enter the schedule number, then press [OK].
The keypad will display the following:
Day Sk001
S M T W T F S Hol
Y Y Y Y Y Y Y N
Press 1-8 OK to SAVE
3. Press [1] to [8] to enable/disable the days of the week that
the schedule will operate.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Holidays >
Name
MENU 7-6-0
This menu allows you to program 16 characters for the holiday
name.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [0] + [6].
A list of holiday names will display on the keypad.
2. Use the [
↑] and [↓] keys to select the timer name that you
want to change, then press [OK] to select. Alternatively,
you can enter the timer number, then press [OK].
The keypad will display the following:
Name H001
Holiday 1 Name
PRESS ◄► OK to SAVE
3. To program the holiday name, use the [
] and [] keys to
scroll the cursor left and right across the user name text.
Use the [
] and [] keys to scroll through the different
characters available. To clear all text from the cursor
position to the right, press the [OFF] key.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Holidays >
Start / Stop Day
MENU 7-6-1
This menu allows you to program the start date and the stop
date of each holiday period.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [6] + [1].
A list of holiday names will display on the keypad.
2. Use the [
↑] and [↓] keys to select the holiday that you
want to change, then press [OK] to select. Alternatively,
you can enter the holiday number, then press [OK].
The keypad will display the holiday start date:
Holiday Dates H001
Start Date Stop Date
01 Jan 01 Jan
Press ◄► OK to SAVE
3. To program the holiday start date and stop date, use the
[↑] and [↓] keys to scroll the cursor left and right between
the holiday day and month. Use the [←] and [→] keys to
scroll the day and month.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > System Options >
Keypad Hi/Lo Temp
MENU 7-7-3
The keypad Hi/Lo temperature allows you to program the
minimum (0 °C) and maximum (50 °C) temperatures the keypad
will monitor (tolerance = +/- 2 °C).
If the temperature falls below the minimum temperature, the
keypad will display ‘Low Temp
˚xx’. If the temperature increases
above the maximum temperature, the keypad will display ‘High
temp ˚xx’.
(xx = programmed temperature to be monitored).
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [7] + [7] + [3].
The keypad will display the current temperature settings.
Keypad Hi/Lo Temp
High Temp Low Temp
00 00
Press ◄► OK to SAVE
2. Use the [
↑] and [↓] keys to program the ‘High’ and ‘Low’
temperatures. To toggle between the ‘High’ and ‘Low’
temperature, use the [←] and [→] keys (Range = 0°C to
50°C).
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.