To Next PageTo Next PageWhat to do if the 'Fill water tank R' light is on my Bosch Coffee Maker?
If the 'Fill water tank R' light is illuminated on your Bosch Coffee Maker, it indicates that the water tank does not have enough water. Fill the tank with cold, fresh water up to the maximum mark and then reinsert the water tank.
Why is water dripping from the brewing unit of my Bosch TASSIMO my way 2 TAS65 Coffee Maker?
If water is dripping from the brewing unit of your Bosch Coffee Maker, it could be due to a damaged or leaky T DISC, or the T DISC hasn't been pierced correctly. Do not use damaged T DISCs and only use each T DISC once. Also, ensure the piercing unit has been correctly inserted by pressing it into its holder until an audible click is heard.
Why is my Bosch TASSIMO my way 2 TAS65 not turning on?
If your Bosch Coffee Maker isn't working and none of the display elements are lit, the appliance may not have a power supply. Check to see whether the appliance is connected to the mains.
Why is my Bosch TASSIMO my way 2 TAS65 brewing but not dispensing coffee?
If your Bosch Coffee Maker starts brewing but no beverage is dispensed, ensure the water tank is correctly inserted. If the water tank was removed during brewing or there's air in the system, start the cleaning process with the orange Service T DISC. Also, check if the float in the water tank is stuck; if so, clean the water tank and free the float.
Why is the Descale Q light flashing on my Bosch TASSIMO my way 2 TAS65 even after using decalcified water?
Even if you've used decalcified water, the 'Descale Q' light may still illuminate or flash on your Bosch Coffee Maker because even decalcified water contains low amounts of calcium carbonate. Descale the appliance.
Why is the water tank light still on in my Bosch TASSIMO my way 2 TAS65 when the tank is full?
If the 'Fill water tank R' light is on even when there's enough water in your Bosch Coffee Maker, the float in the water tank might be stuck. Try cleaning the water tank and freeing the float. Also, ensure the water tank is correctly inserted.
How to adjust the beverage quantity on my Bosch TASSIMO my way 2 TAS65 Coffee Maker?
If the beverage quantity from your Bosch Coffee Maker doesn't meet your requirements, use the drink size buttons (N–N–O) to set your individual drink volume before you begin brewing. To reduce the quantity during brewing, press the Start / Stop button. To increase it, press and hold the Start / Stop button until the required amount is reached. Also, limescale build-up in the appliance could cause reduced quantity so descale the appliance.
What to do if the touch controls on my Bosch TASSIMO my way 2 TAS65 Coffee Maker are not working?
If the controls on your Bosch Coffee Maker aren't responding to touch, it could be due to a technical fault. Unplug the appliance, wait about 5 minutes, and then plug it back in. Alternatively, the control panel might be dirty. Unplug the appliance, clean the display elements/controls with a soft, damp cloth, and then plug it back in.
Why can't I open the brewing unit on my Bosch Coffee Maker?
The brewing unit of your Bosch Coffee Maker may be locked. Only open the brewing unit when the status display has stopped flashing and remains lit continuously.
Why is there water under my Bosch TASSIMO my way 2 TAS65 Coffee Maker?
If you notice water on the surface below the cup stand of your Bosch Coffee Maker, it's likely condensation, which isn't a fault. Wipe the water away with a cloth.
General| Brand | Bosch |
|---|---|
| Model | TASSIMO my way 2 TAS65 Series |
| Category | Coffee Maker |
| Language | English |
Crucial guidelines for safe operation and user responsibilities.
Warnings and precautions related to electrical hazards.
Warnings about hot surfaces and liquids during operation.
Precautions to prevent fire hazards associated with the appliance.
Warnings about potential injuries from misuse or specific substances.
Details the functions of buttons and displays on the control panel.
Addresses issues where the appliance is completely unresponsive.
