EasyManua.ls Logo

Bosch Tronic 2000T ES80 - Technical Characteristics and Dimensions; Intended Use

Bosch Tronic 2000T ES80
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 720 818 420 (2016/09) Tronic 1000T / 2000T
4 | Technical Characteristics and dimensions
must not be performed by children without
supervision.”
“If the power cable is damaged, it must be
replaced by the manufacturer, its customer
service department or a similarly qualified
person, so that risks are avoided.”
2 Technical Characteristics and
dimensions
2.1 Intended use
The appliance was designed to heat and store DHW. Comply
with all regulations and standards related to drinking water
applicable in the country.
Use the appliance only in closed systems.
Only use adequate solar liquid in the heat exchanger coil (if
present).
Using the appliance for any other purpose will be considered
incorrect use. Bosch accepts no liability for any damage
resulting from such use.
2.2 Type overview
[ES] Electric Storage
[030] Capacity (liters)
[6] Version
[1200W] Power
[BO] Brand
[L1, M1] Design
[X] Standard diameter
[S] Slim
[K] Temperature regulator
[N] No temperature regulator
[N] No temperature indicator
[W] Wall mounted appliance
[V] Vertical installation
[H] Horizontal installation
[B] Bottom connections
2.3 Appliance Description
Steel-glassed tank in conformity with the European
regulations
Tank designed and built to withstand high pressures
Exterior material: steel sheeting and / or plastic
Easy handling
Insulating material: polyurethane without CFC
Anticorrosion protection: magnesium anode.
2.4 Anticorrosion protection
The inside of the tank is lined with homogeneous glass enamel,
completely neutral with regards to compatibility and contact
with potable water. This lining is neutral with regard to the use
with potable water. The existence of a magnesium anode
provides additional anticorrosion protection.
2.5 Accessories
Fig. 1
[1] Hook (2x)
1)
[2] Sleeve (2x)
1)
[3] Safety valve (8 bar)
[4] Galvanic isolator (2x)
1)
Water characteristics Unit
Water hardness, min. ppm
grain/US gallon
°dH
120
7.2
6.7
pH, min. – max. 6.5 – 9.5
Conductivity, min. – max. μS/cm 130 – 1500
Table 2 Water characteristics
ES 030 6 1200W
1500W
BO L1
M1
X
S
N
K
NWV B
ES 050 6 1500W BO L1
M1
X
S
N
K
N W V
H
B
ES 080 6 2000W
1500W
BO L1
M1
X
S
N
K
NWV
H
B
ES 100 6 2000W
1500W
BO L1
M1
X N
K
N W V
H
B
ES 120 6 2000W BO L1 X N
K
NWV B
Table 3
1) Only some models
6720801526-01.2V
3
1
2
4

Related product manuals