4 | Explanation of symbols and safety information US
Copyright6 720 646 951 (2011/09)
B Additional Canadian safety instructions:
– As per the Canadian Electrical Code, C22.1-02
Section 26-744, an auxiliary terminal block must be
fitted to the unit before connecting to the electrical
supply (Kit Part N° “AE Canada Kit”).
(See Page 17).
– A green terminal (or a wire connector marked “G,”
“GR,” “GROUND” or “GROUNDING”) is provided
within the control. To reduce the risk of electrical
shock, connect this terminal or connector to the
grounding terminal of the electrical service of
supply panel with a continuous copper wire in
accordance with the Canadian Electrical Code,
Part I.
– This product shall be protected by a Class A ground
fault circuit interrupter.
B Keep this manual in a safe place once the unit has
been installed as it may be needed for future
reference.
To Next Page
Loading...
