To Next PageTo Next Page
Need help?Do you have a question about the Bosch Tronic 4000 T and is the answer not in the manual?
General| Power | 1.5 kW |
|---|---|
| Voltage | 230 V |
| Water Connection | 1/2 inch |
| Protection class | IP24 |
| Power Supply | Electric |
| Mounting | Wall Mounted |
| Power Consumption | 1.5 kW |
| Type | Electric Storage Water Heater |
Defines signal words like DANGER, WARNING, CAUTION, NOTICE and symbols.
Directs users to read instructions, follow regulations, and observe safety.
States compliance with European and national requirements.
Outlines proper usage and regulatory compliance for potable water.
Details the construction and material of the hot water tank.
Provides a table with dimensions (A-G) for different appliance models.
Illustrates and lists the main components of the appliance.
Identifies and explains the buttons and display of the control panel.
Explains the icons and functions shown on the display controller.
Specifies initial commissioning procedures and required precautions.
Details the steps for turning the appliance on and off.
Describes the automatic operation and learning capabilities of the SMART mode.
Explains how to set and use the manual operating mode for water temperature.
Explains the function of vacation mode to prevent freezing.
Describes how to reset the appliance to factory settings.
Details how to adjust water temperature and associated risks.
Explains how to lock and unlock the control panel.
Instructions for monthly activation of the pressure relief valve.
Procedures for draining the appliance, including frost risk.
Guidance on cleaning the appliance exterior safely.
Details the automatic function to kill bacteria by heating water above 65 °C.
Stresses that installation must be done by qualified experts following regulations.
Provides criteria for selecting a suitable installation location and protection zones.
Instructions for physically fixing the appliance to the wall using appropriate fixings.
Details on connecting water inlets/outlets, using galvanic isolators and filters.
Instructions for installing the pressure relief valve and related safety components.
Emphasizes safety during electrical work, including danger of shocks and lightning.
Steps for correctly connecting the appliance to the mains power supply.
Requirements for qualified personnel and use of original spare parts.
Guidance on cleaning the appliance exterior with a soft cloth.
How to check for leaks from the pressure relief valve during heating.
Instructions for manual activation of the pressure relief valve.
Highlights customer liability for regular maintenance and testing.
Verifies that all appliance components are functioning correctly.
Explains the role of the magnesium anode in corrosion protection.
Describes the safety thermostat's function and reset procedure.
Provides solutions for common appliance problems and error codes.
Lists specifications like capacity, weight, power, and water connections.
Details energy efficiency classes, consumption, and settings.
Illustrates the electrical connection diagram for the appliance.
Guidelines for environmentally friendly packaging and disposal of used appliances.
Information on the proper disposal of electronic waste according to regulations.
