Bosch Universal Impact 700 - Product Features; Noise;Vibration Information

English | 13
ceramic and plastic. Tools with electronic control and clock-
wise/anticlockwise rotation are also suitable for screwdriv-
ing.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Keyless chuck
(2)
"Drilling/impact drilling" selector switch
(3)
Rotational direction switch
(4)
Lock-on button for on/off switch
(5)
On/off switch
(6)
Speed preselection thumbwheel
(7)
Auxiliary handle with depth stop (insulated gripping
surface)
(8)
Handle (insulated gripping surface)
(9)
Depth stop
(10)
Chuck key
(11)
Keyed chuck
(12)
Universal bit holder
a)
(13)
Screwdriver bit
a)
(14)
Hex key
b)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b)
Commercially available (not included in the scope of deliv-
ery)
Technical Data
Impact drill UniversalImpact 700 UniversalImpact 730 UniversalImpact 7500
Article number
3603A31300 3603A31400
3603A31470
3603A31401
Rated power input W 701 730 750
Max. power output W 530 530 530
No-load speed min
-1
50–3200 50–3200 50–3200
Impact rate min
-1
48000 48000 48000
Rated torque Nm 1.6 1.6 1.6
Stall torque in accordance with
EN 62841
Nm 17 17 17
Speed preselection ● ● ●
Constant electronic control ● ● ●
Clockwise/anticlockwise rotation ● ● ●
Fully automatic spindle lock
(Auto-Lock)
● ● ●
Spindle collar diameter mm 43 43 43
Max. drilling diameter
– Masonry mm 14 14 14
– Concrete mm 14 14 14
– Steel mm 12 12 12
– Wood mm 30 30 30
Chuck capacity mm 2–13 2–13 2–13
Weight according to
EPTA-Procedure01:2014
kg 2.1 2.1 2.1
Protection class
/ II / II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/vibration information
Noise emission values determined according to
EN62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 102dB(A); sound power level
110dB(A). Uncertainty K=5dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according toEN62841-2-1:
Drilling into metal: a
h
=2m/s
2
, K=1.5m/s
2
,
Impact drilling into concrete: a
h
=18m/s
2
, K=1.5m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
Bosch Power Tools 1 609 92A 8X7 | (01.06.2023)