Getting Started
1. Place the mixer on a clean, dry surface to ensure the suction feet grip
securely.
2. Gently pull the Power Cord (d) from the built in cord storage
compartment, and plug it in.
3. When using the High-Torque Drive (c), the Detachable Cover (a)
must be securely in place on the High Speed Drive (b); to operate
the motor.
4. The High-Torque Drive (c) powers the mixing bowl. Both drives (b&c)
power many other optional attachments that can be viewed in this
book.
5. Turning the Speed Control Knob (e) to the left “M” is a momentary
“pulse” position and provides full speed and power for the time it is
held in position. “0/off”, is the off position.
6. Turning the Speed Control Knob (e) to the right beginning with
Speed 1 the lowest speed. The speed increases with each setting
up to the highest speed, Speed 4. Start at the lowest speed and
gradually increase to higher speeds.
7. When using your Bosch
®
Mixer it is important to use the attachment
best equipped to handle the load. Throughout this book you will find
recipes for all the different attachments and how to best use them.
5
To Next Page
Loading...
