To Next PageTo Next Page
Need help?Do you have a question about the Bosch US7 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | US7 |
| Category | Water Heater |
| Fuel Type | Electric |
| Activation Rate | 0.5 GPM |
| Phase | Single |
| Temperature Range | 85-140°F |
Details symbols used in the manual and their meanings, including warning signs and informational icons.
Provides essential safety precautions for using electrical equipment, including grounding and installation guidelines.
Contains legal disclaimers and approval numbers, particularly for installations in the Commonwealth of Massachusetts.
Explains the coding system used for technical identification of different heater models and their features.
Lists the items included in the product package, such as the water heater unit and mounting hardware.
Provides a clear mapping between model names and their corresponding technical identification numbers for easy reference.
Provides a detailed overview of the water heater's components, illustrated with a diagram and numbered parts list.
Presents the internal wiring plan of the heater and includes a critical safety warning regarding electrical shock.
Explains how the water heater works, its operating principles, and provides a table of temperature rise based on flow rate.
Provides crucial safety warnings and general guidelines for the proper installation of the water heater unit.
Details critical warnings and procedures for preventing freeze damage to the unit, which is not covered by warranty.
Covers specific warnings and notes regarding the installation process, including placement and water pressure requirements.
Explains how to connect the unit to the water supply, recommending specific materials and procedures for optimal performance.
Discusses the impact of water quality on appliance longevity and provides recommended water analysis and treatment advice.
Details the requirements for electrical connections, including grounding, wiring by a qualified electrician, and specific model ratings.
Provides step-by-step instructions for connecting the power wires to the terminal block and ground stud, including cable termination.
Guides on how to properly position and mount the heater unit securely to the wall, considering location and water connections.
Advises on selecting the optimal location for mounting the unit, considering safety, accessibility, and water pipe runs.
Outlines the options for routing the electrical cable, either through the cover bottom or the back of the unit.
Details the process of marking and drilling holes for wall mounting, ensuring secure attachment of the unit's backplate.
Covers drilling holes, securing the unit with screws, and a critical warning about non-return check valve installation.
Provides critical warnings about using a frozen unit and advises on initial power-on procedures for safety.
Details the process for starting up the unit when connected to a sink, including opening taps and checking power.
Explains how to adjust water flow to achieve the desired hot water temperature and checks for leaks.
Provides a symptom-based guide for installers to diagnose and resolve issues like no light, cold water, or incorrect temperature.
Offers solutions for common user issues such as no water flow, cold water, temperature fluctuations, and low flow rates.
Identifies key internal components of the heater with a diagram and lists part numbers for replacement.
