Possible cause ActionFault
Thelaundrywasnotspun.
(Laundryis stillwet).
Unsatisfactorywashing
result.
Alwaysloadthe drumwithseverallargeand smallitems
together.
Largeitemsof clothinghavebecomeentangledandcould
notbedistributedevenlyin the drum.Forreasonsof
safetythe high-speedspincyclewasautomatically
prevented.
Excessivesudsdueto too muchdetergent,non HE
detergentused
Thedegreeofsoilingwashigherthanestimated.
Mix1 tablespoonof fabricsoftenerwith1 pint(1/2liter)of
waterandpourinto the maindetergentdispenser
chamber;reducetheamountof detergentused;useHE
detergent.(lookforthe "HE"symbol).
Selectsuitablecycle
or
Stainremoval asanadditionaloption.
Notenoughdetergent. Adddetergentaccordingto themanufacturer's
specifications.
Detergentresidueon the Somephosphate-freedetergentscontainwater-insoluble Brushoff spotswhenlaundryis dry.
laundry, residuesthat mayappearas light spotsonthe laundry.
Grayresidueonthe Dirtaccumulationfrom ointments,fats oroils. Addthe maximumamountof detergentandselectthe
laundry, highestpermissibletemperature.
Systemshakesor shudders Drumsystemsuspensioncanshiftduringspeedup, this Mixsmallandlargelaundrypiecesin loadto minimize
whenpassingfromlowerto is notafailure, thiseffect. Makesurethe unitis level,seepage15.
higherspeedspinning.
Fault displays
Text in display Possible cause Action
field
"Checkwatertap!" Waterfaucetsnotturnedon. Turnonwaterfaucet,cyclecontinues.
Supplyhosekinkedortrapped. Eliminatethe cause.
Strainerinsupplyhoseclogged. Cleanthe waterinletstrainers(seePage27).
Waterpressuretoolow. Eliminatethecause.
Aquasto¢_ Hosesafetyfeatureactivated. Checkfor safetyindicator(seepage13). Ifred,replace
hose,
Uselessdetergentfor futurewashloads, Detergents
specificallydesignedfor yourHighEfficientcywasher
producefewersudsandwill includethe letters"HE"onthe
packaging,
Cleanthe waterdrainagepipeand/ordrainhose,
Checkwhetherlaundryistrappedin door,
Closethedoor,
Closewaterfaucetandinvestigatethe leak,
"Sudsor blocked
pump?"
Toomuchdetergentusedor pump is blocked.
"CheckDoor!" Doornotclosedproperly.
"AquaStopT,v, AquaStopT'v'is triggered
Activated"
Locateandresolvethe leak. Checkallconnections.
ContactCustomerServiceto resetAquaStop_M
(referto Page32).
Ifthe fault cannot be eliminated with the aid of the above table, switch the appliance off, wait 5 seconds, switch the appliance on
again, select and start the cycle.
Ifthe fault continues, call customer service; see Page 32.
31
To Next Page
Loading...
