Cleaning and servicing en
37
5. Set the rotary switch to .
6. Turn the To-Go blender jug upside
down.
→Fig.
22
7. Place the To-Go blade insert on
the main unit and rotate it in a
clockwise direction until it locks
into place.
→Fig.
22
8. Set the rotary switch to the recom-
mended speed.
→Fig.
23
Tip:We recommend pausing oper-
ation several times when preparing
smaller quantities of baby food in
the To-Go blender jug.
Processing can also take place
with instantaneous switching.
→"Using instantaneous switching",
Page35
9. Process the ingredients until you
achieve the required result.
10.To end the operation, set the rotary
switch to .
→Fig.
24
7.10 Closing the To-Go
blender jug
Requirement:The appliance has
stopped.
1. Turn the To-Go blender jug anti-
clockwise and remove it from the
main unit.
→Fig.
25
2. Turn the To-Go blender jug and un-
screw the To-Go blade insert.
→Fig.
25
3. Insert the seal for the lid.
→Fig.
26
4. Close the mouthpiece on the lid.
→Fig.
26
5. Screw the lid and the To-Go
blender jug in tightly.
→Fig.
26
Cleaning and servicing
8 Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
8.1 Dishwasher-safe compon-
ents
Find out here which components can
be put in the dishwasher.
ATTENTION!
Some parts may be damaged if they
are put in a dishwasher.
▶
Only put dishwasher-safe parts in
the dishwasher.
▶
Only use programmes that do not
heat the water above 60°C.
▶
Do not wedge plastic parts in the
dishwasher.
This overview describes the cleaning
process for the components.
→Fig.
27
8.2 Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
▶
Do not use cleaning agents con-
taining alcohol or spirits.
▶
Do not use sharp, pointed or metal
objects.
▶
Do not use abrasive cloths or
cleaning agents.
To Next Page
Loading...
