Bosch VitaPower Series - Pushing Down Food for Processing; Adding More Ingredients; Emptying the Blender Jug; Processing Food Using the To-Go Blender Jug

Basic operation en
37
4. Set the rotary switch to ⁠.
→Fig.
12
Tip:To prematurely stop the pro-
gramme, set the rotary switch to ⁠.
5. "Empty the blender jug."
→Page37
Pushing down food for pro-
cessing
1. Remove the measuring jug and in-
sert the pusher into the filling
opening.
→Fig.
13
2. Push down the food from the sides
of the blender jug.
→Fig.
13
Adding more ingredients
1. During processing, remove the
measuring jug and add the ingredi-
ents through the opening in the lid.
→Fig.
14
2. To add larger quantities, set the
rotary switch to ⁠.
3. Wait until the appliance stops.
4. Turn the lid in the direction and
remove it.
→Fig.
15
5. Add the ingredients.
→Fig.
15
6. Place the lid on the blender jug
again and continue to process the
ingredients.
Emptying the blender jug
Requirement:The appliance has
stopped.
1. Turn the blender jug anti-clockwise
and remove it from the base unit.
→Fig.
16
2. To pour out just a portion of the
processed food, use the spout.
‒ Open the spout.
‒ Place the processed food in a
suitable container or serve im-
mediately.
‒ Close the spout.
→Fig.
17
3. To pour out all of the processed
food, remove the lid.
→Fig.
18
Processing food using the To-
Go blender jug
WARNING
Risk of scalding!
Hot food may splash during pro-
cessing and scald you.

Do not process food that is hotter
than50°C in the To-Go blender
jug.
1. Prepare the food.
For example, cut up large items of
food.
2. Add the food to the To-Go blender
jug.
→Fig.
19
Observe the minimum and max-
imum processing quantities.
→"Overview of recipes", Page40
3. Place the To-Go blade insert on
the To-Go blender jug.
→Fig.
19
4. Screw the To-Go blade insert and
the To-Go blender jug in tightly.
→Fig.
20
The To-Go blade insert can only be
connected to the base unit when
the To-Go blender jug is fully
screwed on.
5. Turn the To-Go blender jug upside
down.
→Fig.
21