Bosch VitaPower Series - Cleaning and Servicing; Dishwasher-Safe Components; Cleaning Products; Cleaning the Base Unit

Cleaning and servicing en
39
Cleaning theblender
WARNING
Risk of cutting!
The blender knife has sharp blades.

When cleaning and emptying the
blender jug, watch out for the
sharp blades.

Never touch the edges of the
blades with bare hands.
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.

Never set the blade insert down
with the blade facing downwards.
1. Remove the measuring jug.
→Fig.
27
2. Remove the lid.
→Fig.
27
3. Turn the blender jug anti-clockwise
and remove it from the base unit.
→Fig.
28
4. Turn the blender jug upside down.
5. Open the retaining bracket.
→Fig.
29
6. Remove the EasyClick blade insert
from the blender jug.
→Fig.
29
7. Clean the components.
Cleaning the To-Go blender
jug and To-Go blade insert
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.

Never set the blade insert down
with the blade facing downwards.
1. Turn the To-Go blade insert anti-
clockwise and remove it from the
To-Go blender jug.
→Fig.
30
2. Turn the lid anti-clockwise and re-
move it from the To-Go blender
jug.
→Fig.
31
3. Open the mouthpiece on the lid.
→Fig.
31
4. Clean the components.
Using the cleaning pro-
gramme
You can use the cleaning pro-
gramme to preclean the blender jug
and the blade insert.
Requirements
¡ The blade insert is installed.
¡ The blender jug has been attached
and locked.
¡ The blender jug is filled with clean-
ing fluid.
→"Overview of recipes", Page40
¡ The lid is attached and locked.
¡ The rotary switch is set to ⁠.
1. Set the rotary switch to ⁠.
→Fig.
8
a The status display (LED) on the
rotary switch lights up.
2. Press the programme button .
→Fig.
11
a While the programme is running,
the LED for lights up and the
status display (LED) goes out.
3. Wait until the appliance stops.
4. Set the rotary switch to ⁠.
5. Turn the blender attachment anti-
clockwise and remove it from the
base unit.
→Fig.
16
6. Turn the lid in the direction and
remove it.
→Fig.
32
7. Dispose of the cleaning fluid.
a The most stubborn food residues
are removed.
8. Clean the components.