ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
LFLF
Ĉ
a
~
ʔ
ʔ
ʋ
~
(
a
a
$
$¯
a
$
>
$
$
a
$§,
ǯ
$
Individual settings
ʑ
Options buttons
The spin speed and temperature can be changed before and during the selected programme. The effects depend on
the programme progress.
ʑ
V (Temperature °C)
You can change the displayed washing temperature. The maximum washing temperature that can be selected depends
on the programme that has been set.
ʑ
(Finished in)
When you select the programme, the relevant programme duration is displayed. You can delay the start of the programme
before it begins. The "Finished in" time can be set in increments of one hour up to a maximum of 24 hours. Press the
(Finished in) button repeatedly until the desired number of hours is displayed (h = hour). Press $Start/Reload.
ʑ
(Spin speed in rpm) / (Rinse hold = no final spin)
You can change the spin speed shown or select c(Rinse hold = no final spin, laundry remains in the water after the
final rinse,
--- appears in the display panel). You can change the spin speed shown. The maximum selectable spin
speed depends on the model and on which programme is currently selected.
ʑ
Additional functions a and overview of programmes, page 7
ĉSpeed Perfect
For washing in a shorter time with a washing result comparable to that of the standard pro-
gramme. Maximum load
aOverview of programmes, page 7.
ĈEco Perfect
For saving energy with a washing result comparable to that of the standard programme.
S
Reduced Ironing
Special spin sequence with subsequent fluffing. Gentle final spin at reduced speed.
Residual moisture in the laundry is increased slightly.
= Aqua Plus Additional rinse cycle. Increased water level. For areas with very soft water or for further
improving the washing result.
ʑ
Childlock
(
in the display panel
You can lock the washing machine to prevent the functions you have set from being changed
inadvertently.
ON/OFF: after the start/end of the programme, press and hold $Start/Reload for approx.
5 seconds.
Note: The childlock can remain activated until you wish to start the next programme, even after
switching off the machine.
Then you can deactivate the childlock before starting the programme and activate it again as
necessary once the programme has started.
Note:
– The
(symbol is lit: Childlock active.
– The (symbol flashes: Childlock active and then the programme selector is altered.
To prevent the programme from stopping, turn the programme selector back to the original
programme, the ( symbol is lit again.
ʑ
Add laundry
§+ o,
in the display panel
If you want to add additional items of laundry after the programme has started, press the
$ Start/Reload button. The machine checks whether adding laundry is possible.
§+ , are lit: Adding laundry is possible.
ǯflashing: Wait until §+ , are lit.
Note: Only open the washing machine door when both the
§+ , symbols are lit.
ǯ: It is not possible to add laundry.
Note: for safety reasons, the washing machine door remains locked when the water level and/
or temperature is high, or during spinning.
To continue the programme, press the $Start/Reload button.
ʑ
Energy saving mode
If the washing machine is switched on and is not operated for several minutes before the programme starts or at the
end of the programme, the display panel light goes out and the $Start/Reload button flashes.
Press any button to turn the light back on.
a
LF
7
I
7
/
:
>c
6
$
K
a
>
$
To Next Page
Loading...
Need help?
General