Bosch WAV28G43 - Programme Adjustment and Saving; Adjusting Programme Settings; Saving Favourite Programmes; Loading Laundry Correctly

en operation
34
13.3 Adjusting the pro-
gramme settings
Requirement:A programme has
been set.
→"Setting a programme", Page33
▶ Adjust the programme settings.
→"Buttons", Page24
Observe the information about op-
erating logic →Page19.
Note:The programme settings are
not saved permanently for the pro-
gramme.
Adjusting additional programme
settings
1. Press Optionen to call up addi-
tional programme settings.
2. Select the programme settings.
3. Press Optionen to call up the main
menu.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
1. Set the Memory programme.
2. Press to call up the sub-menu.
3. Select a programme.
→"Operating logic", Page19
4. Press Main menu to call up the
main menu.
5. If required, adjust the programme
settings.
→"Adjusting the programme set-
tings", Page34
a The programme is saved.
13.5 Loading laundry
Note:To prevent creasing, note the
maximum load for the programmes.
→"Programmes", Page27
Requirements
¡ The laundry is prepared and sor-
ted.
→"Laundry", Page32
¡ The drum is empty.
1. Open the door.
2. Place the laundry in the drum.
3. Close the door.
Ensure that there is no laundry
trapped in the door.
13.6 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
1. Pull out the detergent drawer.
2. Press down on the insert and re-
move the detergent drawer.
3. Insert the measuring aid.
4. Insert the detergent drawer.