Bosch WDU8H541ES - Removing the Support Struts; Hose and Cable Lengths

en Positioning and connecting
16
Removing the support struts
1. Unscrew and remove all screws in
the vertical transport struts.
2. Remove the transport struts.
3. Undo and remove the screws on the
horizontal transport strut.
4. Remove the transport strut.
Hose and cable lengths
Connection on left side
or
Connection on right side
Tip: The following are available from
specialist dealers/the after-sales
service:
■ An extension for Aqua-Stop or cold
water supply hose (approx. 2.50 m);
order no. WMZ2381
■ A longer supply hose (approx.
2.20 m) for standard model.
7
7
( ~ 145 cm
0 ~ 150 cm
8 ~ 95 cm
@ 60 cm ~ 100 cm
( ~ 100 cm
0 ~ 195 cm
8 ~ 140 cm
@ 60 cm ~ 100 cm



#



#