en Operating the appliance
40
– Insert/pull out the mains plug
with dry hands only.
2. Turn the water tap on.
3. Open the appliance door.
Switching on the appliance/
selecting a programme
Press the # button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The i Algodón/Algodão (Cotton)
programme (only washing), which is
preset at the factory, is then always
displayed.
You can use this programme or select a
different programme.
Note: If you have activated the
childproof lock, you have to deactivate it
before you can set a
programme.~ "Childproof lock"
on page 43
Presettings and maximum load are
indicated on the Touch-Display for the
selected programme.
Adjusting the selected
programme
Changing default settings
You can use the displayed default
settings or adjust the selected
programme to fit the laundry care needs
~ Page 43 e.g. Temperature, Spin
speed, Finish in time.
To activate/ deactivate Wash+Dry or
Dry functions and drying levels touch
the half lit buttons on the display.
Notes
■ Options can be selected, deselected
or changed depending on the
progress of the programme.
■ If the buttons can be selected, they
will be half lit in the display, then turn
into full lit after activated.
To Next Page
Loading...
