Overview of programmes en
35
Drying table
Starching
Note: Laundry should not be treated
with fabric softener.
1. Switch on the appliance.
2. Select the à programme.
3. Measure starch into compartment ©
in accordance with the
manufacturer's instructions (clean
first if necessary).
4. Touch the A button.
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the appliance to bleach
clothes.
Estimated drying time (min)
Recommended drying programme Drying load
(kg)
ö (Iron
dry)
» (Cup-
board dry)
¾ (Cup-
board dry+)
i Algodón/Algodão (Cottons) + Dry 1.0-2.0 40-50 50-70 65-90
2.0-4.0 50-75 70-95 90-135
4.0-6.0 75-90 95-120 135-160
o Mix+ Dry 0.5-1.5 30-40 35-60 45-80
1.5-2.5 40-60 60-90 80-110
t Down Wear + Dry 1.5 - 50-120 80-150
± Drying time table is only for reference. For wash + dry program, washing duration shall be added for
total program time.
± The time listed above is the reference value, the actual drying effect may be affected by the clothing
type, clothing weight, dehydration degree and ambient temperature.
± In order to achieve uniform drying effect, it is recommended to distinguish between heavy and light-
weight clothing. For example, separate the thick towel and the shirt to dry.
± ¾ (Cupboard dry+) is recommended for drying bulky or heavy clothing.
± In order to reduce the wrinkling of clothing after drying, it is recommended to put a small amount of
clothing drying.
± Please refer to the panel display for the drying time of the programme not mentioned in the table above.
To Next Page
Loading...
