Programme default settings en
37
After starting the programme (if a
“Finish in” time has been selected and
the programme has not yet started), you
can change the preselected number of
hours as follows:
1. Select the A button.
2. Touch the ˜ or ~ button to change
the number of hours.
3. Select the A button.
Wash+Dry or Dry
First you have to place the laundry into
the drum and choose the wash
programme. Then the drying function
can be activated by selecting the
buttons Wash+Dry or Dry. Washing and
drying without interruption mode is
available by pressing Wash+Dry. For
dry only programmes without washing,
press Dry on the display.
Note: When a programme (with
optional drying function) is selected, the
buttons Wash+Dry , Dry would be half
lit on the display. After selected, it would
be turned into full lit.
For programmes only designed for
drying function, Wash+Dry will not be lit
on the display.
After Wash+Dry or Dry selected, one of
¾ (Cupboard dry+)/» (Cupboard dry)/
ö (Iron dry) drying levels would be
defaulted in the display, and you can
change the level as required
*
.
■ » (Cupboard dry): For single-layer
fabrics. Garments can be folded or
hung up in cupboard.
■ ¾ (Cupboard dry+): For fabrics
made of thick, multilayered items of
clothing, which need to be dried
longer. Garments can be folded or
hung up in a cupboard. Laundry
more dry than » (Cupboard dry).
■ ö (Iron dry): Normal, single-layered
laundry that still needs to be damp
after drying and is suitable for
ironing or hanging up.
Notes
■ To ensure an even drying result, sort
the laundry before drying.
~ "Preparing laundry for drying"
on page 26
■ Do not exceed the maximum loads
for drying.
~ "Overview of programmes"
on page 29
■ Maximum spin speed for washing
programmes with drying will be
selected automatically to obtain a
suitable drying result.
* Some drying programmes do not
offer different drying levels.
To Next Page
Loading...
