Bosch WTA 3500 User Manual

BOSCH
Installation Instruction.=°-
Models
WTA 3500
Electric Vented Dryer
WTL 5400
Electric Condensation Dryer
J \
Quick Reference Index
INTRODUCTION 2
TOOLS NEEDED FOR INSTALL. 2
PARTS SUPPLIED FOR INSTALL. 2
PARTS NEEDED FOR INSTALL. 2
DRYER ELECTRICAL CORD 2
GROUNDING INSTRUCTIONS 2
ADDITIONAL GROUNDING
PROCEDURE 3
ELECTRICAL RECEPTACLE
VENTING 3
DUCTWORK 3
EXHAUST VENT HOOD 3
CONDENSATE DRAIN 3
TECHNICAL DATA
ELECTRICAL REQUIREMENTS 4
MINIMUM INSTALL. CLEARANCES 4
CHOOSING THE LOCATION 4-5
INSTALLATION
STEP 1, UNPACK THE DRYER 5
STEP 2, INSPECT THE DRYER 5
STEP 3, POSITION DRYER NEAR
INSTALLATION AREA 5
STEP 4, EXHAUST DUCT 5-6
STEP 5, CONDENSATE HOSE
CONNECTION 6-7
STEP 6, ELECTRICAL 7-8
STEP 7, POSITION AND LEVEL
THE DRYER 8
STEP 8, CONNECT DUCT SYSTEM
TO DRYER 9
STEP 9, FINAL CHECK LIST 9
I IMPORTANT: Before you begin read these instructions completely and carefully. ]
I
INSTALLER: Remove the door from all discarded appliances to avoid the danger of a
child suffocating.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
(In case of change of ownership, manual should be conveyed with the dryer.)

Bosch WTA 3500 Specifications

General

Brand	Bosch
Model	WTA 3500
Category	Dryer
Language	English

Summary

Dryer Installation Requirements and Preparation

Introduction and Safety Grounding

Key safety and installation prerequisites, including grounding instructions for safe operation.

Venting and Ductwork Requirements

Guidelines for exhausting air and connecting ductwork for optimal vented dryer performance and safety.

Technical Data and Location Selection

Essential specifications, clearances, electrical needs, and criteria for choosing a suitable installation site.

Installation Steps and Final Checks

Unpack and Position Dryer

Procedures for removing packaging and moving the dryer to its installation area.

Exhaust Duct Connection (WTA 3500)

Steps for connecting the exhaust duct to the WTA 3500 vented dryer.

Condensate Hose Connection (WTL 5400)

Connecting the condensate drain hose for the WTL 5400 condensation dryer.

Electrical Connection and Cord Modification

Detailed instructions for connecting the power supply and modifying the cord if necessary.

Positioning, Leveling, and Grounding

Final placement, stability adjustment, and additional grounding steps for safety and performance.

Final Checks and Owner Handover

Verifying correct installation, testing operation, and providing manuals to the owner.