en Cleaning and servicing
36
3. Pull out the heat exchanger hori-
zontally.
4. Clean the heat exchanger from all
sides under running water and dry
it.
5. Clean the opening with a soft,
damp cloth.
6. Slide the heat exchanger in hori-
zontally as far as it will go.
Ensure that the heat exchanger is
inserted with its handle pointing
downwards.
7.
Close the base unit →Page36.
Closing the base unit
Requirement:The base unit is open.
→"Opening the base unit", Page35
1. Insert the heat exchanger cover by
the handle.
To Next Page
Loading...
