Bosch WTW85530EE - Exiting Setting Mode

en Appliance settings
16
1. Switch on the appliance.
2. Turn the programme selector to
position 1.
3. Press Ajuste secado/secar (Adjust
drying level) 5 and, at the same
time, turn the programme selector to
position 2.
4. Release Ajuste secado/secar
(Adjust drying level) 5.
Setting mode is now activated.
Changing the audible signal volume
You can adjust the volume of audible
notification signals (that indicate that a
programme has ended, for example)
and audible button signals by turning
the rotary selector to the following
positions:
■ 2: Audible notification signal volume
■ 3: Audible button signal volume
1. Activate setting mode.
2. Turn the programme selector to the
required position.
3. Use the Terminado en/em (Ready
in) + or – button to set the volume
you require (0 = off; 4 = very loud).
Switching the automatic switch-off
function on/off
If the appliance is not used for an
extended period, it may automatically
switch itself off until a programme starts
or when a programme has ended in
order to save energy.It can be switched
back on again at any time by pressing
#.
You can switch the appliance's
automatic switch-off function on or off
as follows:
1. Activate setting mode.
2. Turn the programme selector to
position 4.
3. Use the Terminado en/em (Ready
in) + or – button to switch the
appliance's automatic switch-off
function on or off.
Exiting setting mode
Once you have applied all the settings,
press # to switch off the appliance.
The settings you have selected will be
saved and will take effect the next time
the washing machine is switched on.