en Programme settings
24
--------
Terminado en/em
(Ready in)
‚ - ƒ… Before starting the programme, you can preselect the pro-
gramme end time ("Ready in" time) in hourly increments (h =
hour), up to a maximum of 24 hours:
1. Select a programme.
The programme duration will be displayed for the selected
programme, e.g. ‚:…† (hours:minutes).
2. Press Terminado en/em (Ready in) repeatedly until the
required number of hours is displayed.
Note: Use the Terminado en/em (Ready in) + button to
increase the setting values, and the Terminado en/em
(Ready in) – button to reduce them.
3. Press Inicio/Pausa (Start/Pause) A.
This activates the time delay.
Before the programme starts, the selected number of
hours (e.g. ‰) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Note: The programme duration is included in the "Ready in"
time.
E.g.
\ ‹ : …‹
The drying time for timed programmes can be extended to up
to 3 hours 30 minutes in 10-minute increments.
To Next Page
Loading...
