Test
2013-10-23 / DIS 113_58300000133444_ara_en_l Repair Instructions Laundry Repair Instruction;T22 Page 17 of 35
5.1 Starting / ending demo programme
5.1.1 Starting the demo programme
1. Rotate programme selector switch to position 1.
2. Press and hold down Low heat button.
3. Rotate programme selector one position to the right.
4. Release Low heat button.
5. Rotate programme selector switch to position 5.
6. Press the Start/Stop button.
Result:
The demo programme runs without drum rotation and heat pump.
5.1.2 Ending the demo programme
► Switch off the appliance.
Result:
The demo programme ends.