Repairs
2013-10-23 / DIS 113_58300000133444_ara_en_l Repair Instructions Laundry Repair Instruction;T22 Page 34 of 35
6.12 Removing / installing drum bearing
Graphic 14: Drum bearings
1 Drum shaft 4 Bolts
2 Inner and outer raceway 5 Retaining ring
3 Bearing block 6 Bearing cover
Prerequisite:
• Worktop has been removed.
• Outer and inner process air cover has been removed.
6.12.1 Removing drum bearing
1. Remove screws (4) from the cover.
2. Remove bearing cover (6).
3. Remove retaining ring (5).
4. Remove outer raceway (2).
5. Remove screws (4) from the drum bearing (3).
6. Raise drum.
7. Take drum bearing out of the appliance.
6.12.2 Installing drum bearing
► Install drum bearing in reverse order.
To Next Page
Loading...
