28 | English
1 609 92A 39C | (9.9.16) Bosch Power Tools
Do not point the laser beam at per-
sons or animals and do not look into
the laser beam yourself, not even
from a large distance.
Working Advice
General Information
The reception lens 7 and the laser beam
outlet 8 must not be covered when tak-
ing a measurement.
Measurement takes place at the centre
of the laser beam, even when target sur-
faces are sighted at an incline.
Troubleshooting – Causes and
Corrective Measures
Cause Corrective Measure
Temperature warning indicator (b)
flashing; measurement not possible
Measuring tool
not within the
operating tem-
perature range
between – 10 ° C
and +40 °C.
Wait until the meas-
uring tool has
reached the operat-
ing temperature
OBJ_BUCH-2820-002.book Page 28 Friday, September 9, 2016 11:54 AM
To Next Page
Loading...
