32 | Tips on saving energy
6 720 644 144 (2010/09)
6 Tips on saving energy
Heating economically
The boiler is designed to provide a high level of comfort while
keeping gas consumption and the resulting environmental impact
as low as possible. The gas supply to the burner is controlled
according to the level of demand for heat. The boiler continues to
operate with a low flame if the demand for heat reduces. The
technical term for this process is modulating control. Modulating
control keeps temperature fluctuations small and provides even
distribution of heat throughout the home. This means that the
boiler may stay on for relatively long periods but will use less gas
than an appliance that continually switches on and off.
Inspection/Maintenance
To ensure that gas consumption and environmental impact
(pollution, etc.) remain as low as possible over an extended
period of time, we recommend that you take out an inspection/
maintenance contract with an authorised installer covering the
annual inspection and servicing and maintenance at other times
as required.
Heating control system
Additional instructions are contained in the operating instructions
for the heating controller.
To Next Page
Loading...
