What to do if there is sound but no picture on my Bose Home Theater System?
If your Bose Home Theater System produces sound but no picture, ensure that your TV is powered on. Also, if you're playing a DVD or video source, verify that the TV is set to the correct video input.
Why is my Bose Home Theater System remote control inconsistent?
If your Bose Home Theater System's remote control is inconsistent or not working, check the batteries and their polarity (+ and –). Also, make sure you are pointing the remote control at the media center.
How to fix distorted sound on Bose Home Theater System?
To address distorted sound on your Bose Home Theater System, ensure speaker cables are undamaged and securely connected. Reduce the output level from any external audio devices connected to the music center. Also, reduce the input level setting for the connected device in the system menu.
How to fix FM sound distorted on Bose Home Theater System?
If the FM sound on your Bose Home Theater System is distorted, try adjusting the antenna position to reduce interference.
Why radio does not work on Bose Home Theater System?
If your Bose Home Theater System radio does not work or has poor reception, make sure the antennas are connected properly. Move the AM antenna at least 20 inches (50 cm) from the media center and adjust its position. Ensure the AM antenna is upright and move antennas away from the TV or other electronic equipment. You may be in an area of weak signal coverage.
Why my Bose Home Theater System doesn’t do anything?
If your Bose Home Theater System is not responding, ensure the unit is turned on by pressing the On-Off button on the remote and the media center. Check that the power cord is securely inserted into the Acoustimass module and plugged into a working AC outlet. Select a source like CD/DVD or AM/FM. As a reset, unplug the Acoustimass module power cord for one minute, then reconnect it and wait for the “BOSE 3•2•1” message on the display.
What to do if disc won’t eject from Bose Home Theater System?
If your Bose Home Theater System disc won’t eject, turn off the unit. Then, unplug the Acoustimass module power cord from the outlet for one minute, and reconnect it to reset the system. Before powering it back on, press and hold the Eject button on the media center.
Why DVD or CD does not play on Bose Home Theater System?
If your Bose Home Theater System is not playing a DVD or CD, check that the Play symbol in the display is lit. After pressing the CD/DVD button, wait a few seconds before pressing Play. Ensure the disc is properly inserted (label-side up). Try ejecting and reloading the disc. Clean the disc if it's dirty or dusty. Try another disc in case the current one is defective. Make sure the region codes for both the DVD and player match.
General| Brand | Bose |
|---|---|
| Model | 3.2.1 GS Series II, 3.2.1 Series II |
| Category | Home Theater System |
| Language | English |
Classifies the DVD player within the media center as a Class 1 Laser Product.
States that the digital apparatus meets Class B emissions limits per Canadian regulations.
Instructs proper disposal of used batteries according to local regulations.
Welcome and overview of the 3-2-1 Series II system's features and ease of setup.
Details disc types, region codes, and MP3 file criteria for compatibility.
Details the limited transferable warranty for the 3-2-1 Series II systems.
Provides space to record system serial numbers, dealer info, and purchase date.
Instructions for carefully unpacking the system components and checking for completeness.
Guidance on positioning the media center, considering ventilation, disc access, and cable reach.
Advice on speaker and Acoustimass module placement for optimal sound and stability.
Instructions for connecting the Acoustimass module, speakers, and antennas.
Steps for connecting the TV, VCR, and other devices to the media center.
How to connect digital audio sources and game consoles to the media center.
Steps for inserting the AA batteries into the remote control.
Instructions for connecting the power cord to the Acoustimass module and AC outlet.
Steps to check all connections and ensure the system is ready for operation.
Details the functions of the remote control buttons and the status LED.
Describes the buttons on the media center's top control panel.
Explains the various lights and indicators on the media center display panel.
Instructions for turning the 3-2-1 system on and off using the remote or the media center.
Steps for inserting and playing a video DVD, including initial setup recommendations.
Explains how to pause, stop, resume, skip chapters, scan, and repeat DVD playback.
How to use the DVD Lock menu to restrict access to DVDs based on ratings.
Steps for inserting and playing an audio CD.
Explains CD playback controls like pause, stop, skip, scan, repeat, and shuffle.
Methods for tuning FM/AM radio stations using the remote or seek buttons.
How to store favorite radio stations as presets for quick access.
Procedure for erasing a stored radio station preset.
How to play external sources and set the sleep timer for automatic system shutdown.
Instructions for setting up the remote to control other devices via direct code entry or searching.
Steps for programming the remote for VCRs/PVRs and searching for unknown device codes.
Detailed steps for programming the remote for cable/satellite boxes and VCRs/PVRs.
How to check which device code the remote is currently using for a specific audio device.
How to change which device the remote uses for channel selection (TV, CBL-SAT, AUX).
How to view the settings menus for each source on the TV screen or media center display.
Step-by-step guide to changing settings within the source menus using the remote control.
Details settings for FM/AM radio and CD playback.
Describes DVD playback settings like Movie EQ, Range Compression, Mono Decoding, and A-B Repeat.
Settings affecting TV, CBL-SAT, and AUX sources, including Movie EQ and Dolby Digital 1+1.
How to navigate to and view the main System menu on the TV screen.
Step-by-step guide to changing system-wide options (Audio, Video, Media Center, etc.) using the remote.
Details available audio adjustments, including Bass Compensation, Treble Compensation, Audio Processing, and Input Levels.
Describes video adjustments such as Aspect Ratio, Video Connector, Video Format, and Progressive Scan.
Options for media center display brightness, language, optical source, tuner spacing, and Bose Link Room Code.
Options for setting up the remote to control TV, CBL/SAT, and AUX device brands and codes.
Options to restrict DVD viewing by rating and set a password, including MPAA rating guide.
Instructions for cleaning the media center and speakers using soft cloths.
How to properly clean discs to prevent fingerprints and scratches.
Steps for replacing the batteries in the remote control.
Information on compatible Bose mounting accessories like brackets and stands.
A table listing common system problems and their solutions.
Contact information for Bose Customer Service for further assistance.
Details on power ratings, audio/video inputs, outputs, and antennas.
Physical specifications including dimensions, weights of components, and finish.
Lists of codes for programming the remote to control cable and satellite boxes.
Lists of codes for programming the remote to control TVs, VCRs, and DVRs.
To Next Page
