Need help?Do you have a question about the Bose 601 II DIRECT/REFLECTING and is the answer not in the manual?
General| Brand | Bose |
|---|---|
| Model | 601 II DIRECT/REFLECTING |
| Category | Speaker System |
| Language | English |
Details the woofer, tweeter, and crossover network configuration of the speaker system.
Explains the crossover network's components, dual frequency operation, and design goals.
Lists the speaker components: two 8" woofers and four 3" tweeters per cabinet.
Details the minimum and maximum power requirements for the speaker system.
Provides the speaker dimensions: 29.5" H x 14" W x 13" D.
Instructions for testing the speaker with audio sweep signals from 15Hz to 15kHz.
Procedure to check for mechanical noise from the speaker drivers using a 25Hz signal.
Method to detect air leaks in the speaker cabinet using a 40Hz signal.
Procedure to verify the correct electrical phasing of the speaker drivers.
Steps to remove the woofer from the speaker cabinet, including screw and wire disconnection.
Guide for installing a new woofer, including wiring and dress ring attachment.
Procedure for removing the tweeter, noting access via the woofer opening.
Steps for installing a new tweeter, including wiring and securing.
Lists all part numbers and descriptions for the two-terminal speaker configuration.
To Next Page