Bose CineMate GS Series II User Manual (English)

Other manuals for Bose CineMate GS Series II

Code List28 pages

Quick Setup Guide2 pages

Questions and Answers:

K
kathleendillonJul 25, 2025
What to do if my Bose Speaker System has no sound?
- M
  Megan WellsJul 25, 2025
  If your Bose CineMate Speaker System has no sound, ensure the system is turned on (the green LED on the interface module should be lit). Increase the volume and, if applicable, select the correct source on your CineMate GS series II remote. Check that the TV isn't muted and verify that the interface module and speaker cables are firmly connected to the Acoustimass module. Also, inspect the speaker connections and ensure the correct TV video input is selected. Confirm that the TV’s audio output is enabled, and if it's set to VARIABLE, turn off the TV's internal speakers and increase the TV volume. If using a different sound source, make sure it's playing audio.
I
idavisJul 31, 2025
What to do if my Bose CineMate GS II Speaker System has no power?
- D
  danvalenzuelaJul 31, 2025
  If your Bose Acoustimass Speaker System has no power, unplug the Acoustimass module power cord from the AC wall outlet for one minute. Ensure the power cord is securely inserted into the Acoustimass module and reconnect it firmly into a working AC wall outlet. The green LED should flash 10 times, then turn off, indicating standby mode. Also, verify that the interface module is properly connected to the Acoustimass module, and use the remote control to power on the system.
C
Christopher SmithAug 7, 2025
What to do if my Bose Speaker System sound is distorted?
- M
  Mark SheaAug 7, 2025
  If the sound from your Bose Speaker System is distorted, check the speaker cables for damage and ensure they are securely connected. Additionally, try reducing the audio output level from the TV connected to the interface module.
M
melissaharrisAug 12, 2025
How to fix a Bose CineMate GS II Speaker System remote control that is inconsistent?
- K
  Kevin HallAug 12, 2025
  If your Bose Speaker System remote control is acting inconsistently, first check the battery to ensure it is correctly installed. Point the remote directly at the interface module, and make sure there are no obstructions blocking the signal. Remove any protective film from the lens on the front of the interface module. If you have a CineMate® GS series II, check if the source button flashes when pressed and verify that the green LED on the interface module flashes when using the power, volume, or mute buttons. If issues persist, consult the Universal Device Codes book for your device and brand to try programming an alternative code.
A
Aaron SteeleAug 18, 2025
What to do if my Bose CineMate GS II has sound but no picture?
- J
  Julie RodriguezAug 18, 2025
  If your Bose Speaker System setup has sound but no picture, ensure that the TV is turned on and that the correct TV/Video input is selected.

Bose CineMate GS Series II Specifications

General

Product color	Black
RMS rated power	- W
Recommended usage	Home theatre
Remotely operated	Yes
Remote control type	Wireless
Audio output channels	2.1 channels
Amplification device included	No
Satellite speaker type	-
Number of satellite speakers	2
Power source	AC