Bose CineMate GS Series II - 5. Connecting to a Power Outlet

12
SYSTEM SETUP
ItalianoSvenska DeutschNederlands EnglishFrançais Español
1. Insert the large plug on the power cable into the
power connector marked on the Acoustimass
module.
2. Plug the other cable end into the AC (mains) power.
5
Connecting to
a power outlet
What you need to use:
Acoustimass
®
module power cable
Acoustimass module
00.Kaiser_OG.book Page 12 Friday, May 15, 2009 7:15 AM