4 Connect the free end
of
the left
(L)
INPUTS cable
to
the LEFT speaker terminals
of
your
amplifier
or
receiver Connect the marked wire
to
the positive
(+)
terminal and the plain
wire to the negative (-) terminal
5 Connect the free end
of
the right
(R)
INPUTS cable
to
the RIGHT speaker terminals
of
your
amplifier or receiver Connect the marked wire
to
the positive
(+)
terminal and the plain
wire
to
the negative (-) terminal
CAUTION:
Before you
plug
in
your receiver
or
amplifier, make sure that no strands
of
wire
from any terminal are brushing against any other terminal Such "bridged" wires create short
circuits which can damage your receiver or amplifier
Figure4
Completed connections
Checking
your
connections
To
avoid damaging your speakers, check
all
connections and correct any problems before
plugging
in
and turning
on
the amplifier
or
receiver Make sure the cube speakers are con-
nected to the module and not directly to the amplifier
or
receiver
7
To Next Page
Loading...
Need help?
General
