16 - English
Connecting to non-HDMI compatible sources
If your source is non-HDMI compatible, connect it to your TV using audio and video
cables (available separately). Refer to your TV owner’s guide for more information.
Tip: If your source has IN and OUT audio connector panels, use audio OUT.
Audio-only sources
If your audio-only source, such as a media or CD player, is non-HDMI compatible,
connect it to the console’s optical, coaxial or analog connector. You can use an
optical, coaxial or analog cable (available separately).
Note: After connecting your audio-only source, you must set the optical, coaxial or
analog input for the appropriate source. You can access these settings using
the System menu (see page 26).
Connecting the console to power
1. Plug the power cord into the Power connector on the console.
2. Plug the power cord into an AC (mains) outlet.
Setting up the Console
To Next Page
Loading...
