SETTING
UP
Choosing a speaker location
The angled design
of
these speakers allows
them
to
direct sound
upward
toward
a seated listener.
So
placing
them
on a
desktop
is a
good
choice. Magnetic shielding protects
your
computer
monitor
from
interference
w.hen
the
speakers are positioned close
to
it.
Place the speaker
that
has a volume control
knob
on
the
front within
easy reach
to
the right
of
your computer. Place
the
oth~r
speaker on the
left (Figure
2).
)
Note:
LEFT
and
RIGHTlabels on the
back
of
the
two
speakers can serve
as a placement aid.
Figure
2
Speakers
in
position near
the
computer
LEFT
speaker
,RIGHT
speaker
Volume
control
Headphone
jack
You may prefer placing
the
RIGHT speaker on
your
left
to
more easily
reach
the
volume control and the headphone jack.
This does no harm, although it changes
how
you hear
the
left and right
stereo sound. For an accurate sound stage,
the
music recorded from
stage left during a live performance
comes
from
the
left speaker. Chang-
ing the placement
of
LEFT and RIGHT speakers alters
that
effect.
Connecting the speakers
A speaker cable is attached
to
the rear
of
the
LEFT speaker. Insert the
free end
of
this cable into the
jack
marked TO LEFT SPEAKER on
the
back
of
the
RIGHT speaker (Figure 3 on page
8).
7
To Next Page
Loading...
