26
BASIC SYSTEM CONNECTIONS
B
ASIC SYSTEM CONNECTIONS
EnglishFrançais Español
Installing the TV on/off sensor
The TV on/off sensor enables the system to automatically turn on the TV, as needed, when
another video source (DVD, cable/satellite box, etc.) is selected. If you choose not to use the
sensor, you need to turn on your TV separately.
For a larger TV, you may want a second person to help as you follow the steps below:
1. Plug the sensor cord connector into the TV SENSOR jack on the media center.
If you are using a SCART adapter, plug the sensor directly into the pass-through
jack provided on the adapter (Figure 14 on page 18).
2. Temporarily position the TV on/off sensor on the back of your TV (Figure 22).
Note:
DO NOT attach the supplied mounting strip until you have tested and activated the
automatic feature as explained below.
Figure 22
TV on/off sensor installed
on your TV
Rear of TV
TV on/off sensor
Sensor
ounting
strips
Media center
connection panel
TV SENSOR
jack
Sensor cord
Note: Mount the sensor on the bottom rear of a projection TV chassis. Front projectors with a
separate screen may not work with the sensor.
3. Turn on your TV to test the sensor and activate the feature.
A. On the LIFESTYLE
®
system remote control, press
System
and use the arrows
to move around the on-screen menu. Press
Enter
to make selections:
• Move right to
Video
and press
Enter
.
• Move down to
TV Power
and press
Enter
.
• Move up or down to select the proper TV Power option:
±
Automatic
(for TV models that do not use a European-style SCART
connector).
±
Euro Connector
(for TV models that use a SCART connector).
• Press
Enter
.
B. On the rear of the TV, move the sensor as needed, and notice when the on-screen
TV Power Statuschanges from TV not detected to TV ON.
C. On the TV screen, move down to
TV Power, select Automatic, and press
Enter.
D. Press
Exit
to leave the System menu. This completes activation.
To Next Page
Loading...
