OPERATING
YOUR
CONNECTED DEVICES
Watching
TV
Your
TV
may be receiving its program content through a
set-top box or the tuner built into your
TV.
Note:
Since
most
TVs
come with an
IR
(infrared) remote,
you
may
need to
point
the
Bose®
remote
at
your
TV
to
operate
it.
Using
a
set-top
box
If you connected a cable, satellite, or other set-top box
to the
LIFESTYLE®
control console, it will appear
in
the
SOURCE menu under the name you assigned it during
the setup process.
1.
Press the remote SOURCE button and select the
device that provides your
TV
programs.
2.
Tune
to
a station. See "Tuning to a
TV
station."
Using
the
tuner
in
your
TV
If you are using the tuner
in
your TV to receive TV
programs:
1.
Press the remote SOURCE button and select
TV.
2.
Press the
TV
Input button to select the internal
tuner
in
your
TV.
3.
Tune
to
a station. See "Tuning to a
TV
station."
8
To
return
to
using
other
sources,
use the TV Input
button to first select the input for the Bose system, then
press the SOURCE button and select another source.
Tuning
to
a TV
station
You
can tune
to
a TV station using any
of
the following
methods:
I
Enter the channel number on the keypad
and press OK. Use the dash button for
channel numbers using a dash
or
period.
Press Channel Up (_.) or Down
(T)
to change channels.
Press
;>
to
tune
to
last selected channel.
Press GUIDE. Use the navigation,
page up/down, and OK buttons
to select a station from the program
guide.
To Next Page
Loading...
