Bose Lifestyle 235 - Page 41

CARE AND MAINTENANCE
Troubleshooting
Problem What to do
The system
is
not responding
•
Make sure the control console
is turned on.
to
initial
operation of my
•
Make sure batteries are
in
the remote.
Bose®
remote
•
Reset the system.
See "Resetting
the
system"
on page 23.
The Bose remote does not
control a device
I
added
during the
initial
setup
One
video connection is
less
than optimum
System doesn't
do
anything
No sound
•
Press any remote key and watch the power
light
on the
control console. It should blink with each press.
If
not, see
"Pairing the remote with the console" on page 23 and
follow
the procedure.
•
Try setting up the device again. Press the
Setup button
on
the
control console. Select
the device setup
and follow
the onscreen instructions.
•
Use the
manual option for setting up the device. Press the
Setup button on the
control console. Select
the
device options and
follow
the onscreen instructions for
manual
remote setup.
• Your system may need a
software update.
See "Performing
a system software
update"
on page 23.
•
To
change a video connection, press the
Setup button on the
control console and select
the device setup.
Follow the onscreen instructions.
•
Make sure the AC power cord is inserted securely
into the power supply
and the power
supply is firmly
connected
to
the
control console.
•
Make sure the Acoustimass®
module and the power
supply
are
fully plugged
into a
live
AC (mains)
outlet.
•
Press the remote
SOURCE
button and
select
a connected device from the
SOURCE
menu.
•
Reset the system. See "Resetting
the
system"
on page 23.
•
Make sure the Acoustimass
module
is
plugged
into a
live
AC (mains)
outlet.
•
Make sure that the audio input cable
is firmly plugged
into the Acoustimass connector on the control
console
and the other end is
firmly seated into the Media
Center connector on the Acoustimass
module.
• Increase
the
volume.
• Press the Mute button
OEJJ
and make sure your system
is
not muted.
• Check the input connections on the
control console. Make sure that you have
selected
the right source.
•
Check connections between the speakers and the Acoustimass
module.
• For radio operation, connect the
FM
and AM antennas.
•
Reset the system.
See "Resetting
the
system"
on page 23.
21