Bose Lifestyle 235 - Page 43

Resetting
the
system
1.
Press
and hold
the power button on the
control
console for 5 seconds or until
the power light
on
the control console
changes to red.
The power
light
on the
control console
changes to
red when the system shuts down.
2.
Press
and
release
the power button on the
control
console
to restart the system. The power
light
changes
to
blinking
green and then
solid
green
when the system is on and ready to use.
3.
If you still
cannot operate the system using the
remote, try the next procedure to pair the remote
with the
control console.
Pairing
the
remote with
the
console
1.
Make sure your system is on. If
not, press the
power button
on
the
control console.
2.
Hold the remote close to the control console.
3.
Press
and hold both the Mute
button(~)
on
the
control console and the OK
button on the remote at
the same time for five seconds. The power
light
blinks
when pairing is complete.
4.
Press
any remote button and verify that the power
light
on the
control console blinks with each button
press.
CARE AND MAINTENANCE
Performing a system software update
System software updates are
available periodically and
can be
downloaded over the
Internet
to the USB
drive
included
with your system.
1.
Press the Setup button on the front
of
the
control
console to
display the Setup menu.
2.
Using the remote navigation buttons,
select
Update.
3.
Follow
the instructions on the screen.
Note:
To
make sure your
Bose®
remote is updated,
hold
the remote near the front
of
the control console while it
is
being updated.
Contacting customer service
For
additional help
in
solving problems,
contact Bose
Customer Service. See the address sheet included
in
the carton.
23