42 - ENGLISH
Unable to connect the Acoustimass
®
wireless bass module with the console
If you are having issues wirelessly connecting your bass module to your console, you
can also connect it using a 3.5 mm stereo cable (not provided).
Note: If you do not have a 3.5 mm stereo cable, contact your authorized Bose dealer or
Bose customer service.
To install the 3.5 mm stereo cable:
1. On your remote control, press SETUP.
2. Select Speaker Management.
3. Follow the on-screen instructions until “The following steps will show you how to set
up your bass module” message displays.
4. Press , then follow the on-screen instructions to finish setup.
APPENDIX C: ALTERNATIVE WIRED SETUP
To Next Page
Loading...
