ENGLISH - 37
Connecting the front speakers to
the console
1. Place your speakers according to the “Placement guidelines” on page 11.
2. Connect and attach the OmniJewel™ bases to the OmniJewel™ speakers
(see page 35).
3. Insert the molded plug of the four-pin cable into the four-pin FRONT SPEAKERS
connector on the back of your console.
Attaching the rubber feet to your
center speaker
1. Remove the rubber feet from box .
2. Place the center speaker upside down on a soft, protected surface.
3. Remove the protective film from the feet.
4. Attach the rubber feet to the bottom of the center speaker at both ends.
APPENDIX A: INSTALLATION REFERENCE
To Next Page
Loading...
