13
Installation
• Align the speaker with the front of the TV screen (not pushed to the back of the TV).
• Direct each cube speaker slightly away from center, to create a wider area of direct sound.
Note: If you put the speakers in a bookcase unit, be sure to place each one at the front edge
of the shelf. Placing speakers in an enclosed space can change the tonal quality of the sound.
This effect is minimized if the shelves are filled with books.
Surround speakers
Surround speakers create an atmosphere of sound around the listener. Place them in the
back half of your room (
Figure 6).
• Place the speakers at ear height or higher, if possible.
• Adjust them to direct the sound both in front of and behind the listener.
Figure 6
Surround speaker place-
ment options
Acoustimass
®
module
The BUILT-INvisible
®
TA-2 theater amplifier produces bass from an Acoustimass
®
module
built into a wall, the floor, or the ceiling (see
Figure 5).
Note: Follow installation instructions included with the Acoustimass module.
• Choose a location in the front third of the room.
• Always mount an Acoustimass module at the perimeter of the room.
• Keep the ventilation opening no farther than 6" from the juncture of two surfaces (the wall
and ceiling or the floor and wall, for example).
• For best low-frequency performance, mount the Acoustimass module within three feet of
the corner.
191 speakers mounted in rear wall. 191 speakers mounted in side walls.
Cube speakers mounted on rear wall. Cube speakers mounted on side walls.
To Next Page
Loading...
Need help?
General
