11
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Placing the cube speakers
When you place your speakers approximately as shown in
Figure 8 on page 11, they provide the audio atmosphere
of a home theater. You can experiment with speaker
placement and orientation to produce the most pleasing
sound.
CAUTION:
Select a stable and level surface for all speakers.
Vibration can cause speakers to move, particularly on smooth
surfaces such as marble, glass, or highly polished wood. To
reduce the possibility of movement, Bose recommends that you
attach the included rubber speaker feet to the bottom of the
speakers.
Note: If, after running the ADAPTiQ
®
audio calibration
system, you move one or more speakers to a substan-
tially different location, you should re-run the ADAPTiQ
®
audio calibration system.
Figure 8 Approximate speaker locations
Rotate the top cube toward a wall or
other hard surface.
Claudius.book Page 11 Tuesday, January 13, 2009 2:56 PM
To Next Page
Loading...
